Back to Blog
    Pricing & Turnaround

    What a Large Back Patch Costs

    Threadizers TeamNovember 21, 20265 min read

    Back patches are the largest thing most people order, so the quote tends to come as a surprise in one direction or the other. The reason it is hard to guess is that the obvious variable — size — is not the one that drives the number.

    The number that actually sets the price

    Patches are priced on machine time. Machine time follows stitch count. Size matters only because larger patches usually carry more stitches.

    Usually, not always, and that gap is where the money is. A 6 inch circle filled solid edge to edge can carry more stitches than a 10 inch shield with visible background twill. The 10 inch patch is bigger, more visible, and cheaper.

    Once you know that, the levers become obvious.

    Lever one: how much background you fill

    This is the largest single decision on a back patch, and the one most people do not know they are making.

    A back patch is built on a twill base. That twill can be left visible as the background colour, or it can be stitched over. Stitching it over on a 12 inch patch adds tens of thousands of stitches for a result that is usually worse-looking — flatter, heavier, and with no contrast between the design and the field it sits on.

    Leaving the twill visible typically removes a large share of the stitch count on a design of this size. It is the single change that moves a back patch quote most, and it makes the patch lighter on the garment at the same time.

    Lever two: quantity

    Setup happens once. The artwork is digitized once, the machine is set once, the first patch is checked once. That cost is spread across the run, so the first patch carries nearly all of it.

    The practical shape of this: one patch is expensive per patch and there is no way around it. Ten is dramatically better. Twenty-five is better again but by a smaller margin, and from there the curve flattens.

    If you are ordering for a club, a crew or a team, the useful thing to know is that the step from ten to twenty-five is often small in total. Get both quoted before deciding — the difference is frequently less than people assume, and the spare patches cost almost nothing.

    Lever three: colours

    Each colour is a thread change, and each thread change is a stop. On a back patch with eight colours the machine stops eight times per patch.

    Most strong back patch designs work in four or five colours. Designs that arrive with ten are usually carrying two or three that nobody would miss — a near-identical second grey, a highlight that disappears at stitch scale, an outline colour that could be the border colour instead.

    Reducing colours costs nothing at the design stage and shows up in the quote.

    What does not move the price much

    Three things people expect to matter and which mostly do not:

    • Shape, within reason. A shield costs about what a rectangle costs. The exception is an irregular die-cut outline, which does add cost because the shape has to be cut and finished individually.
    • The border, if it is merrowed. The standard wrapped edge is normally included on a regular shape.
    • Going from 10 to 12 inches, if the extra two inches are background. If they are more stitching, it matters.

    Backing choices that do cost more

    Plain sew-on is the baseline and the right choice for a denim or leather jacket, which is where most back patches end up.

    Iron-on adds a little. On a heavy jacket it will not hold anyway, so it is often cost for no function.

    Velcro adds the most, because the hook-and-loop field is an extra material sewn on as a separate operation. It buys you removability, which is worth paying for if you need it and worth skipping if you do not. On a large patch the cost difference is meaningful.

    Digitizing is separate, and it is once

    Before a patch can be made the artwork has to be digitized — turned into a stitch file that tells the machine where to put every stitch. That is a one-off cost per design, not per patch.

    It also carries forward. Reorder the same patch in two years and the file is still there, so the reorder skips that cost entirely and the second batch is cheaper than the first at the same quantity.

    A large back patch takes longer to digitize than a left-chest logo, because there is more of it and because large areas show every flaw in the underlay. It is a real line item on a first order and absent on every one after.

    How to get a number you can rely on

    Send the artwork, the finished width you want, the quantity, and the backing. Those four things are enough to price it exactly.

    If you are still deciding, send the artwork and ask for it at two sizes and two quantities. Comparing four real numbers is far more useful than a range, and it usually shows that the bigger patch at the higher quantity is the one worth having.

    Tags:
    patch pricing
    back patches
    large patches
    patch cost